Garage Door Spring Replacement Tips and Advice


Garage door spring replacement is an important measurement since they are normally apt to general deterioration. Garage door springs normally do a lot of work since they ensure that the garage door opens and closes the way it should be.

So if your experience that your garage door is not opening and closing smoothly, it can be a clear indication that you need to replace the garage door springs. Make sure that you have checked the garage door and its springs thoroughly in order to avoid further injuries and damages.

There are two types of garage door springs that you should be familiar with, extension springs and torsion springs. In the overhead garage door, the torsion springs are found right above the garage door opening. It functions using a mechanism of twisting. Strong and sturdy cables are connected to the garage door and when torsion springs start to twist; the cables and springs help the garage door to lift as opens. These springs extend when the garage door closes. Torsion springs are hard and dangerous to replace, so you need to be very careful while doing so or better to take the professional assistance of any reputed company like, Quality Garage Door Columbus.

The extension springs used on the garage door use the mechanism of stretching. They can be placed on both sides of the garage door to ensure that the garage door opens and closes evenly on both sides. They are side-mounted, long, and weighted springs. They need to be inspected and replaced once in a while because they are worn out due to frequent usage and extreme forced imposed on them.

Garage door spring replacement is never a simple process. Actually, most of the accidents cloud happened during the garage door repair process while changing the torsion springs. If you have the proper skills and caution to do the job, everything will turn in the right direction.

You should be able to understand how to adjust the springs properly because either increase or decrease in the tension of torsion springs can cause the garage door not to open or close correctly. When you experienced imbalanced movements of the garage door, chances are there you have too loose or too tight springs somewhere. So you should be able to inspect the springs thoroughly and to do the necessary replacement. 

First of all, collect all the necessary tools and equipment that you need when you have decided to conduct garage door spring replacement beforehand. You should check the springs and other supporting hardware regularly to determine if it is time to fix or replace the springs. There are many garage door repair and maintenance tasks that you can handle on your own by following the user’s manual as your directions. Make sure that you follow all the steps mentioned in the manual to confirm that you are doing a good job.